To view the lecture program please click here

Back to overview


Bioactive Scaffolds With the Capability to Release Agents Applied in Tissue Engineering

Sunday (01.01.2040)
00:00 - 11:10
Part of:
- Poster Resource efficient production of large-volume aviation structural parts 1 Daniel Elitzer
- Poster A Cu-MoS 2 Superhydrophobic Coating by Composite Electrodeposition 1 Dipl.-Ing. Lucia Helena Prado
- Poster Proteome analysis of elytra from Japanese beetle, Trypoxylus dichotomus 1 Dipl.-Ing. Satoshi Murata
- Poster Structural analysis of developing elytra from Japanese beetle, Trypoxylus dichotomus 1 Jesus Rivera
- Poster High Chromium Cast Irons: Chemical composition and thermal processing effect on secondary carbide precipitation, hardness and wear properties 1 Prof. Martin Duarte Guigou
- Poster Maturing Fabrication Technologies for Aerospace: Obtaining the Permit to fly of an Additive Manufactured System for Space 1 Prof. Dr.-Ing. Fernando Lasagni
- Poster Thin film metrology of bioactivated surfaces and coatings by Imaging Ellipsometry 1 Dr. Christian Hoffmann
- Poster Bacteria-triggered antimicrobial coatings to protect surfaces in aqueous environment 1 Andre Ruland
- Poster Effective strategies for the controlling and dealing with transmission pathway of pathogens in air traffic 1 Christian Helbing
- Poster Development of a Bioartificial Kidney Device 1 Dr. Katarzyna Skrzypek
- Poster Tailoring Degradation Behavior of Magnesium Based Biodegradable Alloys using Bioactive Coatings 1 Dr.-Ing. Farasat Iqbal
- Poster Self-organized Si-Al nanostructured films deposited by magnetron sputtering: a study of the growth mechanism by kinetic Monte-Carlo simulations. 1 Dr. Diego Martinez-Martinez
- Poster Mechanical Properties of CrN/TiN superlattices from ab inito calculations 1 Dipl.-Ing. Lukas Löfler
- Poster XPS distribution profile of fluoroalkylsilanes in sol-gel network obtained by co-condensation and influence on the properties of hydrophobic coatings 1 Agathe Bouvet-Marchand
- Poster Particle shape control via etching of core-shell nanocrystals 1 Dr. Alberto Leonardi
- Poster Percolation-Based Chemical Switch for H2S Gas Detection 1 Dr. Thorsten Wagner
- Poster Phase composition and microstructure of radiation-tolerant ZrN/SiNx and AlN/SiNx multilayer systems, irradiated by He ions 1 Prof. Gregory Abadias
- Poster Hydrogen-Induced Microstructure Optimization of the Ti-6Al-4V 1 Mohammed Kasim Mohsun
- Poster Accelerating the isothermal forging process of titanium aluminides by microstructure adaptive speed control 1 Mark Eisentraut
- Poster A first principles study on stability of B2 phase in TiAl-based alloys 1 Prof. Dr. Florian Pyczak
- Poster Lead iodide thin films deposited by low pressure vapor phase deposition with controlled morphology 1 Dr.-Ing. Marcos Soldera
- Poster Electrodeposition of Cd on supported Ag nanoparticles and film, and their assessment as electrocatalyst material for nitrate reduction 1 Prof. Dr. Silvana G. Garcia
- Poster A green magnetic cooling device 1 Maximilian Fries
- Poster Modification and characterization of coconut fibres for biocomposite applications 1 Martje Armbrecht
- Poster Design of iron and gold nanoparticle-hydrogel composites and their impact on cellular proliferation and differentiation 1 Yaya Li
- Poster Nano-rough titanium surfaces created by wet alkaline etching 1 Michaela Schürmann
- Poster Polyester based Nanoparticles with Tailored Thermal Properties for Drug Delivery 1 Karl Scheuer
- Poster Resorbable 3D printed scaffolds for bone regeneration 1 Dr. Beatriz Araoz
- Poster In vitro activity assessment and drug release capability of novel Silicon oxycarbide-based bioactive glasses for bone regeneration 1 Prof. Dr. Aldo R. Boccaccini
- Poster Nanotechnology for the automotive sector: Upscaling of the melt electro-spinning process for the economic production of efficient, biobased filter systems 1 Kylie König
- Poster Combined Roughness and Functional Analysis of Biomaterials 1 Anne Gärtner
- Poster Biomimetic hematopoietic stem cell niche analogue as model system for osteomyelitis 1 Annamarija Raic
- Poster Dispersion of metallic additions in Al on the nm-scale by Friction Stir Processing 1 Maximilian Gnedel
- Poster Porous sioc-based materials obtained from a hybrid precursor and paraffin wax microspheres 1 Dr. Maria Andrea Camerucci
- Poster Miniaturization of Biomimetic Sensory Devices based on Nanofluidic Pores in Polymer membranes 1 Dr. Mubarak Ali
- Poster On the effect of Al on the interaction between hydrogen and martensitic steels 1 Ph.D. Margot Pinson
- Poster Preserving the surface integrity at nano-scale during small scale in-situ electrochmical testing 1 Tarlan Hajilou
- Poster 2D Discrete Dislocation Dynamics Model of Edge dislocations of a Stationary Crack under hydrogen influence 1 Jan Inge Meling
- Poster In-situ investigation of hydrogen material damage: Construction of a plasma cell 1 Agustina Massone
- Poster Hydrogen-induced cracking resolved by in-situ tensile test on Ni-based super alloys 1 Xu Lu
- Poster Study of hydrogen embrittlement on Fe-22Mn-0.6C TWIP steel by in situ electrochemical nanoindentation and tensile test 1 Ph.D. Dong Wang
- Poster Hydrogen-assisted fatigue crack propagation in a ferritic alloy 1 Di Wan
- Poster Characterization and Thermal Stability of Pulsed Electrodeposited Nanocrystalline Co-Cu 1 Dipl.-Ing. Killang Pratama
- Poster Effect of ternary elements on the eutectic temperature and microstructure in TiAl-x (x=Nb,Cr,Zr) 1 Fabian Kathöfer
- Poster Low temperatures mechanical properties of high entropy alloys with fcc and bcc crystal lattice 1 Dr. Elena Tabachnikova
- Poster Effect of short-range ordering on the slip systems in BCC High Entropy Alloys 1 Korbinian Ziegler
- Poster On the trail of the hydrogen embrittlement by novel critical experiments: In situ nanomechanical testing of high-entropy alloys 1 Ph.D. Dong Wang
- Poster Bioactive Scaffolds With the Capability to Release Agents Applied in Tissue Engineering 1 Prof. Dr. Viviana Mourino
- Poster Interaction of PEI-Glycopolymers with the cellular microenvironment of multiple myeloma cells 1 Felix Schulze
- Poster Consideration on the Nature of Low Temperature Creep in Martensitic Steels 1 Mathias Münch
- Poster Deformation induced phase transformation of a metastable austenitic stainless steel as a function of room temperature milling time 1 Dr. Hasan Kotan
- Poster Cold drawing impact in high strength and plasticity of ultra-high carbon steel wires 1 Dipl.-Ing. Mykhaylo Romanyuk
- Poster Influence of the post-weld surface treatment on the corrosion resistance of the duplex stainless steel 1.4062 1 Dipl.-Ing. Paul Rosemann
- Poster An Eshelby inclusion based model for cementite variants in hypereutectoid steel 0 Dipl.-Ing. Marko Vogric
- Poster Determination of average grain size and grain size distributions of nanocrystalline materials - a comparative study including t-EBSD, TEM and XRD 1 Dr. Christian Braun
- Poster Severe plastically deformed nanostructured magnetic materials – Influence of magnetic field annealing 1 Dr. Stefan Wurster
- Poster Formation of Hollow h-BN Superstructures Using Template Assisted PECVD 1 Daniel Stadler
- Poster Study of O2-Reduction Reaction and Degradation Mechanisms Operating on La0.5-XPrxBa0.5CoO3-δ Cathodes for LT-SOFCs. 1 Ph.D. Diana Garces
- Poster Non-stoichiometry and electrical impedance of thin-film ceria-zirconia solid solutions at elevated temperatures 1 Alexander Wollbrink
- Poster Thin-Film Yttria-Stabilized Zirconia for Electrochemical Oxygen Sensors and Pumps 1 Hendrik Wulfmeier
- Poster Obtention and Characterisation of Mechanically Strong Glass-ceramics from Slag, Fly Ash, Glass Cullet and their Combinations 1 Dipl.-Ing. Diana Mireya Ayala Valderrama
- Poster How Nature Indexing Helps You Find Nanotechnology Literatures and Nanomaterial Data Efficiently 1 Dr.-Ing. Amir Gheisi
- Poster Making Gas Reactions Visible: Broadband Gas Transducers Based on Photonic Crystals 1 Dr. Thorsten Wagner
- Poster New Bismuth Alkylthiolate Complexes for the Chemical Vapour Deposition of Bismuth Sulfide and Bismuth 1 Ufuk Atamtürk
- Poster Obtaining Material Glass Ceramics from industrial Waste of Slag, Ply Ash and Glass Hull - Process 1 1 Dipl.-Ing. Diana Mireya Ayala Valderrama
- Poster Controlled composition tuning of alloy nanoparticles in a gas aggregation source monitored by in-situ UV-Vis 1 Jonas Drewes
- Poster Hydrogen trapping in bcc iron 1 Anastasiia Kholtobina
- Poster Study of the ex-solution process of metallic Fe-Ni nanoparticles in Srx(Ti,Fe,Ni)O3-δ perovskites based SOFC electrodes 1 Dr.-Ing. Catalina Jiménez
- Poster Influence of the structure defects in Fe-Pd-based ferromagnetic shape memory alloys 1 Prof. Dr. Osvaldo Lambri
- Poster Effect of CoOx nanoparticles decoration in the La0.6Sr0.4Co0.2Fe0.8O3-d performance as cathode. 1 Dr.-Ing. Catalina Jiménez
- Poster Hot Corrosion Behavior of Selected Thermally Sprayed Alloy Based Coatings 1 Ph.D. Cesánek Zdenek
- Poster Non-equilibrium solid solution "non-alloy" of molybdenum and sodium 1 Dr. Beate Bergk
- Poster Mechanical behavior of bismuth sodium titanate by nanoindentation 1 Angelica Maria Benitez Castro
- Poster Phase transformation of the (LaxGd1-x)2Zr2O7 system exposed to volcanic ashes at high temperature 1 Cynthia Yanel Guijosa García
- Poster Tensile deformation mechanism of TRIP and TWIP Steels vs strain rate studied ex-situ by EBSD and in-situ by XRD 1 Dr.-Ing. Catalina Jiménez
- Poster Manufacturing of nanostructured thermoplastics by laser-assisted hot embossing 1 Jan-Hendric Rakebrandt
- Poster CNTs in fibres: Multilayered polymerfibers for conductive and sensoric applications 1 Benjamin Mohr
- Poster Development of nanofunctionalized materials for As(V) removal from contaminated Argentinian groundwater 1 Ph.D. Lucia Yohai Del Cerro
- Poster Substitution of lubricants in forming processes: Structuring ta-C layers with Direct Laser Interference Patterning 1 Theresa Jähnig
- Poster Inline topography evaluation of microstructures formed by Direct Laser Interference Patterning 1 Dr. Bogdan Voisiat
- Poster Fatigue resistance improvement of lean duplex stainless steel by laser shock peening 1 Prof. Dr. María Cecilia Marinelli
- Poster Microchannels for controlling cellular mechanotransduction 1 Mohammadreza Taale
- Poster Hierarchical porous sioc-based ceramics developed from infiltration of poplar templates with a polysilsesquioxane 1 Dr. Maria Andrea Camerucci
- Poster Characterization of Radiation and Temperature Resistant Materials for Use in Bolometer Sensors 1 Dr.-Ing. Christine Ruffert
- Poster Microstructure and creep/dwell-time fatigue properties of a hot extruded polycrystalline superalloy (AD730) 1 Anne Hesselink
- Poster Compression and Initial Stages of Sintering of CeO2 Nanoparticles with Different Size, Shape and Doping 1 Prof. Philippe Knauth
- Poster Nonlinear Electric Filler for Field Grading in HVDC applications 1 Sebastian Lehmann
- Poster Mechanical properties of HPT-deformed Nickel/carbon nanotube composites 1 Dipl.-Ing. Andreas Katzensteiner
- Poster Injected polymer blends and composites: processing-morphology-performance relationship 1 Dr.-Ing. Valeria Pettarin
- Poster On the influence of heat treatment state on the processing behavior of aluminum alloys during Friction Surfacing 1 Jonas Ehrich
- Poster The brittle-to-ductile transition in pre-deformed, textured, polycrystalline bcc metals 1 Dr. Jens Reiser
- Poster Effect of Mn partition on the mechanical properties of Dual Phase steel 1 Prof. Dr. Iris Alvarez
- Poster Fracture monitoring of thermally damaged High-Strength Fiber-Reinforced Concrete by Acoustic Emission 1 Dipl.-Ing. Hernan Xargay
- Poster Laser texturing combined with plasma nitriding as a tool to control the tribological performance of steel components 1 Prof. Dr.-Ing. Andrés Fabián Lasagni
- Poster Mechanical spectroscopy study at different temperatures of a rapidly solidified and extruded Al-13Mg-7Si-2Cu alloy 1 Sebastian Carl Greco
- Poster The EU-RISE Project CREATe-Network - Composites for Resource-Efficient Applications and Technologies 1 Dr.-Ing. Flavio Soldera
- Poster German-Argentinean students exchange program in materials science and engineering – I.DEAR-Materials 1 Dr.-Ing. Flavio Soldera
- Poster Bone tissue regeneration based of PCL- HA composites with silver nanoparticles as antibacterial agent 1 Ph.D. Agustina Leonardi
- Poster Directing the hardening reactions of UV-hardening adhesives by UV-light initiation through side-emitting PMMA fibres with non-circular cross sections 1 Benjamin Mohr
- Poster Modelling of coupling coefficients of FEP piezoelectret films with parallel tunnel structure 1 Omar Ben Dali
- Poster Investigation of Ni-Diffusion Properties in Ni/YSZ SOFC-Anodes via Thermal Grooving Experiments 1 Patricia Haremski
- Poster TopoSEM: a novel tool to measure topography from SEM images in a simple way 1 Dr. Diego Martinez-Martinez
- Poster The Interaction of Twin Boundaries with Magnetic Domain Walls in MnAl-C Studied by Combined EBSD and Micromagnetic Modelling Techniques 1 Ph.D. Panpan Zhao
- Poster Cryo-FIB tomography across the Nafion®-catalyst layer interface in PEM fuel cells 1 Martina Heller
- Poster Computed Tomography Experiments on a Laboratory Multipurpose Diffractometer 1 Dr. Natalia Dadivanyan
- Poster Novel Multi-Energy X-ray Laminography for planar fiber reinforced materials 1 Stefan Enghardt
- Poster Structural Characterization of Porous Silica Particles Structured over Multiple Length Scales 1 Andreas Fijneman
- Poster Joining of thermoelectric ceramics to high-temperature resistant metals by a laser-induced brazing process 1 Dipl.-Ing. Daniel Wetzlich
- Poster Multilayer characterization of Inconel-718 and Ni couples with Al in TLPB process 1 Prof. Dr. Silvana Sommadossi
- Poster Improving the efficiency of organic light-emitting diodes using textured polymer foils fabricated by R2R hot-embossing method 1 Prof. Dr.-Ing. Andrés Fabián Lasagni
- Poster High reflectivity all-silica coatings for high power applications 1 Dr. Tomas Tolenis
- Poster Influence of plastic deformation on the piezoelectric properties of BaTiO3 1 Marion Höfling
- Poster Ag as Contacting Material for Mg2SixSn(1-x)-based Thermoelectric Generators: Electrical Contact Resistance and Diffusion 1 Sahar Ayachi
- Poster Thermal and phase stability of skutterudite master alloys for thermoelectric materials 1 František Zelenka
- Poster Abundant Thermoelectric Materials: Preparation, Characterisation and Structuring of Chromium Chalcogenides 1 Hendrik Groß
- Poster Analysis of Cr clusters in a Cu-Cr-Zr alloy after cold rolling and aging 1 Dr. Khadidja Abib
- Poster On the evolution of adiabatic shear bands in the beta titanium alloy Ti-10V-2Fe-3Al 1 Mario Scholze
- Poster Study of ceramo-metallic interfaces of dental application through Acoustic Emission (AE) signals 1 Dipl.-Ing. Valeria Ines Ortega Paredes
- Poster Characterization of Crystallographic Properties in the α→γ’ martensitic transformation in a Fe-Mn-Al-Ni system by EBSD 1 Prof. Dr. Martina Cecilia Avalos
- Poster In situ TEM characterization of phase separation phenomena in bimetallic AuCu and AuNi nanoparticles derived from solid-state dewetting of bilayer metal thin films 1 Dominik Drobek
- Poster Microscopic thin film metrology with UV-VIS-NIR Spectroscopic Imaging Ellipsometry 1 Dr. Christian Hoffmann
- Poster Comparative Studies on Trans-specific Characteristics of Bio-mineralized Calcite. 1 Prof. Dr. Raúl Bolmaro
- Poster Surface rippling of silica glass surfaces scraped by a diamond indenter 1 Jana Hennig
- Poster Orientation-dependent strain hardening of microstructural features in a deformed high-alloy CrMnNi steel studied by nano-indentation 1 Dipl.-Ing. Robert Lehnert
- Poster PhyBaL-CHT - assessment of the correlation to conventional fatigue tests and influence of testing force 1 David Görzen
- Poster Development of a full in-plane ZT-measurement platform for electrodeposited materials 1 Vida Barati
- Poster Development of a thermoelectric generator based on metal and polymer foils 1 Dipl.-Ing. Constantin Wolf
- Poster The effect of nanoscale antiphase boundaries on the high-temperature phase transitions of γ-Al2O3 1 Martin Rudolph
- Poster Efficient numerical and analytical modelling of residual stresses in multilayer coatings 1 Dipl.-Ing. Antonia Wagner
- Poster Shortening of industrial development time by multiscale virtual testing of lithium ion battery anodes 1 Dr. Oleg Benevolenski
- Poster Simulative investigation on the microstructure influences on the electrochemical-thermal behaviour in Li-ion cells 1 Adrian Schmidt
- Poster Studies on hard carbon as a potential anode material for Na-ion batteries 1 Dr. Daria Mikhailova
- Poster Electrochemical energy storage and magnetization switching in Mn3O4@CNT 1 Elisa Thauer
- Poster Nitrogen-doped Mesoporous Carbon for Electrochemical Application 1 Markus Schmitz
- Poster Tailoring morphology and carbon functionalisation of Li(Fe,Mn)PO4 1 Lennart Singer
- Poster Functionalization of Carbon Foams for Sodium Ion Batteries 1 Dr. Esteban Ramos-Moore
- Poster Structural disorder and thermoelectric properties of indium thiospinels 1 Pawel Wyzga
- Poster Does Te really prefer to substitute for Sb in Cu12Sb4S13 tetraedrites ? 1 Dr. Pascal Boulet
- Poster Photovoltaics versus thermoelectrics: two ways to convert heat into electricity 1 Dr. Roland Schmechel
- Poster Interaction of porosity and strain hardening affects the energy absorption efficienc of austenitic stainless steel foams 1 Prof. Dr. Claudia Fleck
- Poster Dispersion of mechanical properties at nanoscale studied by indentation mapping 1 Dr. Ude Dirk Hangen
- Poster Investigation of Vacancy Ordering Phenomena in Phase Change Materials with in situ XRD and TEM Experiments 1 Torben Dankwort
- Poster Corrosion resistance, wear behavior and residual stress for Ti/TiN coatings deposited on nitrided AISI 316L by cathodic arc 1 Prof. Dr. Sonia Brühl
- Poster Phase contrast-enhanced microCT reveals internal defects in root canal restored human teeth 1 Dr. Paul Zaslansky
- Poster Combining in-situ synchrotron X-ray techniques to study the dendritic growth in Ga–In alloys 1 Dr.-Ing. Alexander Rack
- Poster The refurbished ID19 beamline: a versatile station for synchrotron-based full-field hard X-ray microimaging 1 Dr.-Ing. Alexander Rack
- Poster ANKAphase - software for single-distance phase-retrieval from inline X-ray phase contrast radiographs 1 Dr.-Ing. Alexander Rack
- Poster Self-Assembled Protein Hybrid Nanofibers of Albumin and Hemoglobin as Basis for Novel Biomaterials 1 Christian Helbing
- Poster StarPEG-Heparin Microgels to Promote Wound Healing 1 Sebastian Kühn
- Poster High-throughput combinatorial synthesis of a library of hydrogels using nanoliter compartments to optimize cell encapsulation parameters 1 Alisa Rosenfeld
- Poster Externally-triggered hydrogels for controlled nitric oxide release in hematopoietic stem cell culture 1 Julia Hümmer
- Poster Bioinstructive Biomaterials for human induced pluripotent stem cells 1 Hamidreza Pirmahboub
- Poster Stem cell interactions in biomimetic 3D models of the niche 1 Anna Geenen
- Poster Multifunctional nanostructured biohybrid hydrogels for hematopoietic stem cell culture 1 Anita Ludwig-Husemann
- Poster Application of deep convolutional neural networks (DCNN) in materials microscopy to assess the quality of Lithium-Ion batteries 1 Olatomiwa Badmos
- Poster Correlative in situ microscopy studies of highly directional nanowires 1 Lilian Vogl
- Poster In situ tensile testing on a laboratory X-ray diffractometer 1 Dr. Natalia Dadivanyan
- Poster Studies of stress induced deformation in ZnO micro structures by X-ray diffraction 1 Philipp Jordt
- Poster In-situ observation of electron beam induced nanocrystallization of an ultra thin W foil 1 Stefan Noisternig
- Poster Referenced spectroscopic Ellipsometry – very fast in situ and ex situ thickness measurements 1 Dr. Christian Hoffmann
- Poster Correlative 3D characterization of liquid metal catalysts using X-ray and analytical electron microscopy 1 Janis Wirth
- Poster Microscopic investigation of the layer morphology of cathode foils for Li-ion batteries 1 Andreas Kopp
- Poster In-situ XRD analysis during Ar ion etching of compound layers generated on AISI 4140 steel by plasma nitrocarburizing using a solid carbon source 1 Anke Dalke
- Poster Investigating the 3D-structures of oxide layers of Co-base superalloys by means of X-ray tomography, FIB tomography and electron microscopy 1 Malte Lenz
- Poster Growth of nanocrystalline graphene: a high resolution in situ transmission electron microscopy study 1 Chethala neelakandhan Shyam Kumar
- Poster Electron microscopy of Alkyl-halide Cluster Ions deposited on Graphene using Electrospray Ion-beam Deposition 1 Nilesh Vats
- Poster 3D microchanneled, conductive polyacrylamide scaffolds for growing cardiomyocytes 1 Christine Arndt
- Poster Influence of the substrate roughness on the film morphology 1 Dr.-Ing. Aurelien Besnard
- Poster Insight into the structural evolution of nanocrystalline TiN films and the structure-property relationship 1 Dr. Zaoli Zhang
- Poster Influence of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS 1 Prof. Dr. Haroldo Pinto
- Poster Phase separation nanostructure of hybrid organic-inorganic sol-gel materials for silver-based antibacterial coatings 1 Ph.D. Lucia Yohai Del Cerro
- Poster Influence of powder feeding rates at mechanical properties and microstructure of tungsten carbide based powder 1 Jan Schubert
- Poster Indentation behaviour of stainless steel 304 L coated with TiN and TiAlN 1 Dr. Amir Bahri
- Poster Process modification of PECVD for deposition of metal oxides: Applications for renewable energy production and high surface energy 1 Myeongwhun Pyeon
- Poster Field assisted sintering (FAST/SPS) of Y2O3 for plasma facing applications 1 Moritz Kindelmann
- Poster Heat-assisted flash sintering for highly densified 3mol%Y2O3-doped ZrO2 1 Dipl.-Ing. Yudai Yamashita
- Poster Flash sintering for BaTiO3 with AC-pulsed electric fields 1 Dipl.-Ing. Ryosuke Umemura
- Poster Size effects of green compacts on the shrinkage behaviors during 3YSZ flash sintering 1 Dipl.-Ing. Tsuyoshi Kurachi
- Poster Processing of hard magnetic materials enhanced by electric currents 1 Ph.D. Fernando Maccari
- Poster Electric Field Enhanced Sintering of Nanocrystalline Fe-Based Alloys 1 Thomas Brede
- Poster In-Situ SEM and TEM Studies of Electric Field Enhanced Sintering of ZnO 1 Danny Schwarzbach
- Poster Efficient solar water splitting copper oxide heterostructure photocathodes protected by carbon materials 1 Ph.D. Pramod Patil Kunturu
- Poster Anatase-rutile mixed and nanostructured TiO2 thin films by DC and high power impulse magnetron sputtering at glancing angle 1 Ph.D. Adriano Panepinto
- Poster Anisotropic behaviors in metallic thin films obliquely sputter-deposited 1 Ph.D. Raya El Beainou
- Poster Green carbohydrate-assisted combustion synthesis of ZnO as multifunctional material 1 Cristian Dumitru Ene
- Poster Thermal properties of Ultra-light, Polymer derived SiC, SiOC, and SiCN reticulated foams 1 Balanand Santhosh
- Poster Reductive Transformation of V(III) Precursors into Vanadium (II) oxide Nanowires for ORR application 1 Olusola Ojelere
- Poster Characterization of Sol-gel Derived and Spin-coated On Stainless Steel Calcium Hydroxyapatite Thin Films 1 Vilma Jonauske
- Poster Atomic layer deposition of topological insulator selenides and tellurides 1 Dr. Tommi Tynell
- Poster Edge-On MoS2 Thin Films by Direct Atomic Layer Deposition for Hydrogen Evolution Reaction 1 Dr. Changdeuck Bae
- Poster Formation of Bulk Layered Heterojunctions by Atomic Layer Deposition for Efficient Electrocatalyst 1 Dr. Changdeuck Bae
- Poster Resonant Tunneling Induced Enhancement of Electron Emission by Ultra-Thin Coatings 1 Dr. Robert Zierold
- Poster Modeling of grain boundaries and their effects on oxygen vacancies in SrTiO3 – an atomistic simulation approach 1 Cong Tao
- Poster Study of effective properties of composite electrodes in Li-ion batteries 1 Mamun Al-Siraj
- Poster Computational investigations of epitaxial chalcogenide thin films on various substrates 1 Prof. Marie-Christine Record
- Poster Ab initio study of native defects in LiTi2O4 1 Dr. Jianchuan Wang
- Poster Multi Scale Modeling of the Size Evolution of Precipitate Clusters 1 Tobias Stegmüller
- Poster Interaction of a screw dislocation with Cu-Ni-Mn solute clusters in bcc Fe 1 Ph.D. Maria Pascuet
- Poster Interdiffusivities and atomic mobilities in FCC Co–Cr-Mo alloys 1 Ph.D. Yuling Liu
- Poster Unary description of pure elements with neural networks 1 Maximilian Länge
- Poster Experimental and Simulation Research of All-Solid-State Thin Film Batteries 1 Yao Liu
- Poster Kinetics of carbide precipitation in a HSLA steel during advanced thermo-mechanical control process 1 Leandro Nakamura
- Poster Dynamic calorimetric data for thermodynamic modeling of Zr – Nb –Ta system 1 Dr.-Ing. Pedro Ferreirós
- Poster Elastic properties of holely 2d materials 1 Dr. Alexander Croy
- Poster Low carbon iron under high pressure: Understanding the role of plasticity during phase transition 1 Hoang-Thien Luu
- Poster Dislocation nucleation in Au nanowires with stress gradients 1 Junyu Gao
- Poster OVITO - Data analysis and visualization tool 1 Dr. Alexander Stukowski
- Poster From metallic glasses to nanocrystals: Crossover from glass-like to grain-boundary-mediated deformation behaviour 1 Dr.-Ing. Tobias Brink
- Poster Elasto-plastic multiphase-field modeling of martensitic phase transformation in a dual-phase microstructure 1 Ephraim Schoof
- Poster Small strain elasto-plastic phase-field model based on the mechanical jump conditions 1 Christoph Herrmann
- Poster Particle size effects on the glass transition in polymer-particle blends and its application to shape memory polymers 1 Dr. Fathollah Varnik
- Poster Multiscale simulation of lithium ion battery include phase separation, mechanical coupling and shape influence 1 Yang Bai
- Poster How small molecules can trigger the one-way effect in shape memory polymers 1 Axel Marquardt
- Poster Type-I silicon clathrates doped with d-block metals from ab initio calculations - electronic structure and electron density topology 1 Wojciech Szczypka
- Poster Atomistic simulations in U-based alloys 1 Ph.D. Maria Pascuet
- Poster Simulation based design and first experimental validations of carbon materials for a potential-controlled separation of large biomolecules 1 Magdalena Lenz
- Poster Adsorption and Activation of CO2 onto CuO surfaces: A DFT study 1 Dr. Rasoul Khaledialidusti
- Poster Hydrogen migration modeling in a symmetric tilt boundary of the Iron-Chromium system 1 Ph.D. Maria Pascuet
- Poster Imaging Mueller-Matrix Ellipsometry of Anisotropic Thin-Films 1 Dr. Christian Hoffmann

Postersession X: Poster Session
Belongs to:


The possibility of adding different functionalities to scaffolds for bone regeneration allows the incorporation of new properties to guide and promote the formation of new bone [1, 2]. In this regard, an interesting strategy for bone regeneration is to use the scaffold as a controlled administration system for different agents that play an important role in osteogenesis, and / or prophylaxis against infections, to promote integration between biomaterials and the tissue to be regenerated [3-5]. Metal ions such as calcium (Ca2*) and copper (Cu2*) stimulate the promotion of bone formation and regeneration and its vascularization [6]. In addition, Cu2* and Zinc (Zn2*) have bacteriostatic properties associated with low human toxicity and bacterial resistance [6, 7].

In this study, a new nanocomposite and bioactive scaffold was developed that exhibits the capacity to supply multiple therapeutic ions based on bioglass nanoparticles partially replaced with copper and alginate ions crosslinked with Ca2* and Zn2*.

Results and Discussion

The resulting composite scaffolds exhibited homogeneous structures, adequate porosity and sufficient mechanical strength when purchased with previous reports1. In addition, the bioactive nature of the scaffolds was confirmed due to the growth of hydroxyapatite crystals on the surface after 14 days in simulated body fluid. The degradation study indicated that the scaffolds crosslinked with Zn 2 + and Ca2 + (in that order) appear to be stable over time showing a slow degradation rate. According to the analysis of the release profile of Cu2 + (from the bioactive glass nanoparticles) and Ca2 + and Zn3 + (from the crosslinked polymer), the values of the released amount are within the ranges reported for promote angiogenesis, osteogenesis and inhibition of bacterial proliferation, respectively.


The present study represents a positive advance in the preparation of therapeutic scaffolds with the capacity to release in a sequential and prolonged multiple bioactive agents for applications in regenerative medicine. Further studies are required to characterize the cellular response to scaffolds and their ability to form bone both in vitro and in vivo.

Prof. Dr. Viviana Mourino
University of Buenos Aires and CONICET
Additional Authors:
  • Rodrigo Vidotto
    Universidad de Buenos Aires
  • Dr. Juan Pablo Cattalini
    Universidad de Buenos Aires
  • Prof. Dr. Aldo R. Boccaccini
    Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
  • Kai Zheng
    Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)


Category Short file description File description File Size
Poster Bioactive scaffolds with multiple release capability A novel nanocomposite and bioactive scaffold was developed that exhibits the capacity to supply multiple therapeutic ions based on bioglass nanoparticles partially replaced with copper and alginate ions crosslinked with Ca2* and Zn2*. 45 KB Download