To view the poster program please click here

Back to overview

Results: 264

Program filtered by:
MICROSTRUCTURE  

Wednesday (26.09.2018)

11:30
Lecture M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General
Session starts at 10:45

A phase-field study of the influence of volume fraction and elastic inhomogeneity on the microstructure evolution of Ni-base superalloys

Oussama Boualy Prof. Hassan Mharzi Prof. Mustafa Benyoucef Prof. Yann Le Bouar

S1/01 - A2
Lecture P02: Additive Manufacturing Technologies and Materials
P02.1: Applications P02: Additive Manufacturing Technologies and Materials
P02.1: Applications
Session starts at 10:45

Development of a hybrid process chain for material-efficient production of aerospace components

Dr.-Ing. Margarita Bambach Prof. Dr. Sabine Weiß Prof. Dr. Markus Bambach

S1/03 - 221
Lecture S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties
Session starts at 10:45

Effect of Equal Channel Angular Pressing on Mechanical and In-Service Properties of Mg-1%Zn-0.3%Ca Alloy

Natalia Martynenko Dr. Elena Lukyanova Dr. Vladimir Serebryany Dr. Dmitry Prosvirnin Prof. Dr. Vladimir Terentiev Prof. Dr. Georgy Raab Prof. Dr. Sergey Dobatkin Prof. Yuri Estrin

S1/01 - A3
Keynote Lecture F04: Functional Materials for Energy Applications
F04.1: Session 1 F04: Functional Materials for Energy Applications
F04.1: Session 1
Session starts at 10:45

Surface reaction mechanisms and transport kinetics of perovskite mixed conducting oxide thin films

Dr. Markus Kubicek Dr. Edvinas Navickas Dr. Ghislain M. Rupp Dr. Andreas Nenning Dr. Alexander Opitz Prof. Herbert Hutter Prof. Jürgen Fleig

S1/03 - 223
11:45
Lecture C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.1: Session 1 C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.1: Session 1
Session starts at 10:45

Characterization of the microstructure morphology in different phase states of metastable austenitic stainless steel AISI 347

Tobias Daniel Dr. Marek Smaga Prof. Dr. Tilmann Beck

S1/01 - A02
Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.1: Bulk Metallic Glasses and High-Entropy Alloys S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.1: Bulk Metallic Glasses and High-Entropy Alloys
Session starts at 10:45

Mechanical properties of bulk metallic glass composites

Lisa Krämer Verena Maier-Kiener Karoline S. Kormout Yannick Champion Reinhard Pippan

S1/01 - A1
Lecture S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties
Session starts at 10:45

On the effect of equal-channel angular pressing on the mechanical properties and microstructural evolution of 18 kt gold

Sebastian Fritsch Cagatay Elibol Philipp Frint Martin F.-X. Wagner

S1/01 - A3
Lecture M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General
Session starts at 10:45

Phase-field simulation of the anisotropic microstructure evolution during directional solidification in the eutectic NiAl-9Mo system

Kaveh Dargahi Noubary Michael Kellner Dr. Johannes Hötzer Prof. Dr. Britta Nestler

S1/01 - A2
14:30
Lecture S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30

Abnormal grain growth mediated by fractal boundary migration at the nanoscale

Dr. Christian Braun Raphael Zeller Hanadi Menzel Nils Boussard Jörg Schmauch Prof. Carl E. Krill III Prof. Dr. Rainer Birringer

S1/01 - A3
Lecture M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals
Session starts at 14:30

Bainitic transformation for press hardening applications: A multiscale FE-MPF coupled approach

Mingxuan Lin Dr. Diego Said Schicchi Dr. Martin Hunkel Prof. Dr. Ulrich Prahl

S1/01 - A2
Keynote Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.2: Nanostructured Materials and High-Entropy Alloys S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.2: Nanostructured Materials and High-Entropy Alloys
Session starts at 14:30

Microstructure, texture and strength evolution during severe plastic deformation of CrMnFeCoNi high-entropy alloy

Prof. Dr. Werner Skrotzki Aurimas Pukenas Bertalan Joni Eva Odor Prof. Dr. Tamas Ungar Dr. Anton Hohenwarter Prof. Dr. Reinhard Pippan Prof. Dr. Easo George

S1/01 - A1
Keynote Lecture C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.2: Session 2 C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.2: Session 2
Session starts at 14:30

Strain localizations during cyclic deformation investigated by high-resolution digital image correlation

Dr.-Ing. Anja Weidner Prof. Horst Biermann

S1/01 - A02
Keynote Lecture P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization
Session starts at 14:30

Tailoring titanium alloys to additive manufacturing

Dr. Pere Barriobero Vila Dr. Joachim Gussone Dr. Jan Haubrich Dr. Andreas Stark Dr. Norbert Schell Prof. Dr. Guillermo Requena

S1/03 - 221
Keynote Lecture P04: Nanocomposites and Nanolaminated Functional Coatings
P04.2: Microstructural Design and Nanocomposite Thin Films P04: Nanocomposites and Nanolaminated Functional Coatings
P04.2: Microstructural Design and Nanocomposite Thin Films
Session starts at 14:30

Towards nanostructured materials with enhanced mechanical properties by dedicated microstructural design

Prof. Dr. Rostislav Daniel Prof. Dr. Christian Mitterer Prof. Dr. Jozef Keckes

S1/03 - 23
15:15
Lecture S06: Compositionally Complex Alloys – High Entropy Alloys
S06.2: Basics and Overviews S06: Compositionally Complex Alloys – High Entropy Alloys
S06.2: Basics and Overviews
Session starts at 14:30

Combining Thermodynamic Modeling and Additive Manufacturing for High-Throughput Screening of Compositionally Complex Alloys

Fabian Kies Dr. Bengt Hallstedt Dr. Christian Haase

S1/01 - A5
Lecture P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization
Session starts at 14:30

Influence of the chemical composition and building direction on the fatigue behavior of additively manufactured 316L

Dipl.-Ing. Bastian Blinn Dr. Marcus Klein Prof. Dr. Tilmann Beck

S1/03 - 221
Highlight Lecture C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30

Long-range ordered nanoscale domains in an Fe-Co-Mo Maraging steel, an atom probe microscopy and neutron diffraction study

Dr. Sophie Primig Felix Theska Dr. Christoph Turk Dr. Anna Ceguerra Prof. Simon Ringer

S1/01 - A04
Lecture M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.2: Session 2 M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.2: Session 2
Session starts at 14:30

Microstructure, creep and strain partitioning of Mg-Al-Ca alloys

Muhammad Zubair Dr. Stefanie Sandloebes James Gibson Prof. Dr. Sandra Korte-Kerzel

S1/01 - A4
Highlight Lecture S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30

Observation of Grain Boundary Sliding in an Ultrafine Grained Ferrite Steel

Laura Ahmels Dr. Enrico Bruder

S1/01 - A3
15:45
Lecture F04: Functional Materials for Energy Applications
F04.2: Session 2 F04: Functional Materials for Energy Applications
F04.2: Session 2
Session starts at 14:30

CSD-grown superconducting GdBa2Cu3O7-delta nanocomposite films: a comparison between in-situ and ex-situ nanoparticle formation

Dr. Pablo Cayado

S1/03 - 223
Lecture S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30

Ductilisation of tungsten (W) through cold-rolling: Mechanisms of plastic deformation in cold rolled, ultrafine-grained tungsten sheets

Simon Bonk Dr. Andreas Hoffmann Dr. Jan Hoffmann Ute Jäntsch Dr. Michael Klimenkov Dr. Jens Reiser

S1/01 - A3
Oral Poster C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30

Oxygen deficiency evolution in defect-engineered epitaxial SrMnO3 thin films

Hongguang Wang Dr. Vesna Srot Dr. Yi Wang Dr. Hans Boscker Prof. Dr. Jochen Mannhart Prof. Dr. Peter van Aken

S1/01 - A04
Lecture P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization
Session starts at 14:30

Powder development and characterization for the additive manufacturing of cemented carbide components

Thomas Rieger Tim Schubert Julian Schurr Simon Ruck Markus Hofele David Kolb Prof. Dr. Harald Riegel Dr. Timo Bernthaler Prof. Dr. Gerhard Schneider

S1/03 - 221
16:45
Lecture S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30

Effect of macroalloying on microstructure and high temperature oxidation resistance of new refractory compositionally complex alloys

Franz Müller Dr. Bronislava Gorr Prof. Dr. Hans-Jürgen Christ Hans Chen Dr. Alexander Kauffmann Prof. Dr. Martin Heilmaier

S1/01 - A5
Lecture S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties
Session starts at 16:30

Magnetic Binary Supersaturated Solid Solutions processed by Severe Plastic Deformation

Dipl.-Ing. Martin Stückler Dr. Stefan Wurster Dr. Andrea Bachmaier

S1/01 - A3
Lecture F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials
Session starts at 16:30

Microstructure evolution in Ni-containing Co-Re-Cr alloys and its effect on alloy properties

Katharina Esleben Dr. Bronislava Gorr Prof. Dr. Hans-Jürgen Christ Dr. Debashis Mukherji Prof. Dr. Joachim Rösler

S1/03 - 123
Lecture P01: Manipulation of Matter by Electric and Magnetic Fields
P01.3: Session 3 P01: Manipulation of Matter by Electric and Magnetic Fields
P01.3: Session 3
Session starts at 16:30

Pattern Formation during Current Sintering - Experiments

Claudia Gorynski Prof. Dr. Markus Winterer

S1/03 - 283
Lecture C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30

The role of room temperature grain coarsening on initiation of fatigue damage in thin metal films

Dr. Oleksandr Glushko

S1/01 - A03
17:00
Lecture P02: Additive Manufacturing Technologies and Materials
P02.3: Processes P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30

Additive manufacturing of soft magnetic materials and components

David Schuller Torsten Kunert Julian Schurr Tim Schubert Dr. Timo Bernthaler Prof. Dr. Harald Riegel Prof. Dr. Dagmar Goll Prof. Dr. Gerhard Schneider

S1/03 - 221
Lecture C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3 C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30

Creep deformation mechanisms in SX Co-base superalloys: Compositional changes at planar faults studied by means of TEM and APT

Malte Lenz Yolita Eggeler Dr. Julian Mueller Dr. Christopher Zenk Dr. Steffen Neumeier Prof. Dr. Peter Felfer Dr. Surendrar Makineni Dr. Baptiste Gault Prof. Dr. Mathias Göken Prof. Dr. Erdmann Spiecker

S1/01 - A02
Highlight Lecture C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30

Effect of sample size and grain boundaries on the dislocation structures and damage evolution: A micro-fatigue investigation

Dipl.-Ing. Jorge Rafael Velayarce Prof. Dr. Christian Motz

S1/01 - A03
Highlight Lecture S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties
Session starts at 16:30

Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb

Anton Hohenwarter Bernhard Völker

S1/01 - A3
Lecture S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30

Introducing a chip based µ-bulk setup for microscopic heat treatment studies of compositionally complex single crystal superalloys

Dorota Kubacka Yolita Eggeler Prof. Dr. Erdmann Spiecker

S1/01 - A5
Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.3: Properties of SPD Materials and Nanocomposites S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.3: Properties of SPD Materials and Nanocomposites
Session starts at 16:30

Mechanical and Structural behavior of Cu/Fe Nanocomposites produced by Accumulative Roll Bonding

Ph.D. Maher Ghanem Dr. Benoit Merle Prof. Dr. Heinz Werner Höppel Prof. Dr. Mathias Göken

S1/01 - A1
Lecture P07: Joining
P07.1: Session 1 P07: Joining
P07.1: Session 1
Session starts at 16:30

Resistance Spot Welding of Aluminum-Steel Joints Using Modern Medium-Frequency Inverter Technique (MFDC)

Prof. Dr.-Ing. Mario Säglitz Dr. Dirk Berger Alexander Winkler Florian Kiss

S1/03 - 23
17:15
Lecture C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30

Degradation of superelastic NiTi during uniaxial and multiaxial cyclic loading

Prof. Dr. Helena Van Swygenhoven Dr. Miroslav Smid Dr. Steven Van Petegem Dr. Efthymios Polatidis Wei-Neng Hsu

S1/01 - A03
Lecture P02: Additive Manufacturing Technologies and Materials
P02.3: Processes P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30

Experimental analysis of laser post-processing of additive manufactured metallic parts

Juliana dos Santos Solheid Dr. Wilhelm Pfleging Prof. Dr. Hans Jürgen Seifert

S1/03 - 221
Lecture P07: Joining
P07.1: Session 1 P07: Joining
P07.1: Session 1
Session starts at 16:30

Joining aluminium with copper for applications in electro mobility

Dr. Jörg Kaspar Andrea Ostwaldt Andreas Grimm Dr. Jens Standfuß Prof. Dr. Martina Zimmermann

S1/03 - 23
Lecture C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3 C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30

Microstructure Evolution of Niobium Rich Advanced Titanium Aluminide Alloy During Hot Compression

Bhavanish Kumar Singh V. Anil Kumar Dr. Rohit Kumar Gupta Dr. Anand Krishna Kanjarla

S1/01 - A02
Lecture M03: Microstructure Evolution in Applied Materials: Process to Property
M03.3: Polymers and Miscellaneous M03: Microstructure Evolution in Applied Materials: Process to Property
M03.3: Polymers and Miscellaneous
Session starts at 16:30

Thermal energy storage in cement pastes containing microencapsulated phase change materials: a microstructural model analysis

Ph.D. Antonio Caggiano Christoph Mankel Prof. Dr. Eduardus A.B. Koenders

S1/01 - A2
Lecture F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials
Session starts at 16:30

Thermomechanical Induced Precipitation of Intermetallic Phase Particles in Ferritic Stainless Steels

Dipl.-Ing. Jana Pöpperlová Xiuru Fan Dr. Bernd Kuhn Prof. Wolfgang Bleck

S1/03 - 123
Lecture S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30

Trace elements influencing the lattice parameters in the Al10Co25Cr8Fe15Ni36Ti6 compositionally complex alloy

Dr. Anna Manzoni Sebastian Haas Felix Dubois Christoph von Schlippenbach Cafer Tufan Cakir Prof. Dr. Marwan Mousa Prof. Dr. Uwe Glatzel Dr. Nelia Wanderka

S1/01 - A5
17:30
Lecture B05: Biomaterials Applications
B05.3: Session 3 B05: Biomaterials Applications
B05.3: Session 3
Session starts at 16:30

A new method for obtaining magnetic Bioactive glass 45S5® 3D scaffolds modified with nanoparticles of iron-loaded hydroxyapatite, characterization, and evaluation of its biocompatibility in different types of cells.

Dipl.-Ing. Maria Laura Dittler Dr. Gerhard Frank Irem Unalan Alina Grünewald Prof. Dr. Monica Gonzalez Prof. Dr. Aldo Boccaccini

S1/01 - A01
Lecture M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.3: Session 3 M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.3: Session 3
Session starts at 16:30

Atomistic and mesoscale simulations of nanoindentation and nanoscratching of metals – A statistical approach to characterize discrete dislocation microstructures

Prof. Dr. Nina Gunkelmann Dr. Iyad Alabd Alhafez Dominik Steinberger Prof. Dr. Herbert Urbassek Prof. Dr. Stefan Sandfeld

S1/01 - A4
Lecture F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials
Session starts at 16:30

Oxidation behaviour of roughing mill work rolls and effect on thermomechanical fatigue

Kai Bläser Dr. Bronislava Gorr Prof. Dr. Hans-Jürgen Christ

S1/03 - 123
Lecture S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30

Phase stability and solid solution strengthening in fcc high-entropy alloys investigated by a diffusion couple approach

Tom Christopher Keil Dr. Enrico Bruder Prof. Dr. Karsten Durst

S1/01 - A5

Thursday (27.09.2018)

9:30
Lecture F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure
Session starts at 09:15

A Novel Method for a Detailed 3D Reconstruction of Lithium-Ion Battery Anodes

Dr. Jochen Joos Dr. André Weber Remco Geurts Steven Randolph Renae Gannon Dr. Herman Lemmens Prof. Ellen Ivers-Tiffée

S1/03 - 221
Lecture M02: Atomistic Methods for Designing
M02.1: Bulk Materials, Nanoparticles and Thin Films M02: Atomistic Methods for Designing
M02.1: Bulk Materials, Nanoparticles and Thin Films
Session starts at 09:15

Atom packing Changes of TiAl Alloy Nanoparticles during Heating and Coalescence by Molecular Dynamics Method

Dr. Lin Zhang

S1/01 - A2
Lecture F04: Functional Materials for Energy Applications
F04.4: Session 4 F04: Functional Materials for Energy Applications
F04.4: Session 4
Session starts at 09:15

The Role of defects and internal stresses on tuning the multifunctional properties of Metamagnetic Shape Memory Alloys

Prof. Fernando Plazaola I. Unzueta J. Lopez-Garcia Dr. V. Sanchez-Alarcos Dr. V. Recarte Dr. J. I. Perez-Landazabal J. A. Rodríguez-Velamazán Dr. J. J. S. Garitaonandia Prof. J. A. Garcia

S1/03 - 223
Lecture S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15

Ultrafine Fe-Fe2Ti eutectics produced by laser metal deposition: processing and characterization

Angelos Theofilatos Georg Rödler Dr. Jan Haubrich Prof. Dr. Guillermo Requena Dr. Ulrike Hecht Dr. Romuald Laqua Dr. Andreas Weisheit Dr. Federico Sket Dr. Srdjan Milenkovic Prof. Dr. László Gránásy Dr. Tamás Pusztai László Rátkai

S1/01 - A3
10:00
Lecture F04: Functional Materials for Energy Applications
F04.4: Session 4 F04: Functional Materials for Energy Applications
F04.4: Session 4
Session starts at 09:15

Anelastic and magnetic behaviour in Fe and Fe-Al alloy produced by electrodeposition from an ionic liquid

Dr. Bernd Weidenfeller Prof. Dr. Osvaldo Agustin Lambri Dr. Federico Guillermo Bonifacich Dr. Giridhar Pulletikurthi Jiayi Xu Laura Weidenfeller Prof. Dr. Frank Endres

S1/03 - 223
Lecture M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems
Session starts at 09:15

In situ determination of the ferrite grain size evolution during the cyclic austenite-ferrite phase transformation in low-alloyed steels by three-dimensional neutron depolarization

Ph.D. Haixing Fang Prof. Dr. Sybrand van der Zwaag Dr. Niels van Dijk

S1/01 - A01
Lecture S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15

In situ x-ray diffraction of a high work-hardening Ti-6Al-4V prepared by electron-beam melting

Karl Sofinowski Solange Vivès Dr. Steven Van Petegem Prof. Dr. Stéphane Godet Prof. Dr. Helena Van Swygenhoven

S1/01 - A3
Lecture Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini
Session starts at 09:15

Multiphase Characterization of sellected isopleths of Cu-In-Sn system for Pb-free TLPB

Prof. Dr. Silvana Sommadossi Dr. Paula Alonso Dr. Diego Lamas Dr. Suzana Fries Silvana Tumminello

S1/01 - A02
Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure
Session starts at 09:15

Resistance to fatigue crack propagation in the near-threshold region in metals

Dr. Tomas Vojtek

S1/01 - A1
10:15
Lecture M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems
Session starts at 09:15

Effect of Si on the Kinetic Stabilization of ε-Fe3(C,N)1+x in Nitrided Fe-C-Si White Cast Iron

Stefan Kante Prof. Dr. Andreas Leineweber

S1/01 - A01
Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure
Session starts at 09:15

Enhanced Cyclic Mechanical Properties in Ultrafine-Grained Laminated Metal Composites by Interface Engineering

Frank Kümmel Benedikt Diepold Christopher Schunk Dr. Aruna Prakash Dr. Heinz Werner Höppel Prof. Dr. Mathias Göken

S1/01 - A1
Lecture S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application
Session starts at 09:15

Laser Metal Deposition of Al12Co22Cr22Fe22Ni22: microstructure and texture effects on tensile properties

Oleg Stryzhyboroda Dr. Ulrike Hecht Markus Benjamin Wilms Dr. Lorenz Gerke

S1/01 - A5
Lecture S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15

Processing of high-strength C+N austenitic steel by selective laser melting - microstructure and properties

Johannes Boes Prof. Dr. Werner Theisen Dr. Arne Röttger

S1/01 - A3
Lecture F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure
Session starts at 09:15

Virtual materials design for the 3D microstructure of lithium-ion battery electrodes

Daniel Westhoff Dr. Ingo Manke Prof. Dr. Volker Schmidt

S1/03 - 221
10:30
Lecture P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.1: Session 1 P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.1: Session 1
Session starts at 09:15

Electrical anisotropy enhancement in W-Cu based columnar films

Ph.D. Raya El Beainou Dr. Roland SALUT Dr. Laurent ROBERT Jean-Marc COTE Dr. Valérie POTIN Prof. Dr. Nicolas MARTIN

S1/03 - 226
Lecture S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application
Session starts at 09:15

First results on thermal stability and mechanical behaviour of CrFeCoNi equiatomic compositionally complex alloy thin films on silicon and sapphire

Maya Katapadi Kini Wenjun Lu Alan Savan Bladine Courtois Younes Addab Benjamin Breitbach Dominique Chatain Alfred Ludwig Nathalie Bozzolo Christian Liebscher Christina Scheu Christoph Kirchlechner Gerhard Dehm

S1/01 - A5
Lecture S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15

High-Manganese Steels for Additive Manufacturing Applications with Energy Absorption Functionality

Patrick Köhnen Fabian Kies Simon Ewald Maximilian Voshage Prof. Dr. Johannes Heinrich Schleifenbaum Dr. Christian Haase

S1/01 - A3
Lecture M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems
Session starts at 09:15

Phase equilibria in the Al-Cr-Fe ternary system: experimental study and thermodynamic calculations

Maximilian Rank Dr. Peter Franke Prof. Dr. Hans Jürgen Seifert

S1/01 - A01
Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure
Session starts at 09:15

Strategy of multiple crack deflection at tailored interfaces for damage tolerant materials

Prof. Dr. Rostislav Daniel Michael Meindlhumer Dr. Jakub Zalesak Bernhard Sartory Prof. Dr. Christian Mitterer Prof. Dr. Jozef Keckes

S1/01 - A1
11:15
Highlight Lecture S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II
Session starts at 11:15

Additive Manufacture of Ta-Mo-Ti-Al multi-principal element alloy

Dr. Andrey Molotnikov Dr. Daniel Schliephake Prof. Xinhua Wu

S1/01 - A3
Lecture C05: Small Scale and In Situ Mechanical Testing
C05.5: Indentation II C05: Small Scale and In Situ Mechanical Testing
C05.5: Indentation II
Session starts at 11:15

High temperature flow behavior of ultra-strong nanoporous Au assessed by spherical nanoindentation

Dipl.-Ing. Alexander Leitner Dr. Verena Maier-Kiener Dr. Daniel Kiener

S1/01 - A03
Keynote Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.5: Mechanical Properties of Tungsten S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.5: Mechanical Properties of Tungsten
Session starts at 11:15

Micromechanical Modeling of Fatigue Crack Initiation and Early Stages of Short Crack Growth

Prof. Dr. Alexander Hartmaier Dr. Hamad ul Hassan Dr. Martin Boeff

S1/01 - A1
Lecture M02: Atomistic Methods for Designing
M02.2: Cellular and Granular Porous Microstructures M02: Atomistic Methods for Designing
M02.2: Cellular and Granular Porous Microstructures
Session starts at 11:15

Virtual materials testing for investigating the relationship between morphology and permeability of open-cell foams

Daniel Westhoff Dr. Jakub Skibinski Dr. Ondrej Sedivy Bartlomiej Wysocki Prof. Dr. Tomasz Wejrzanowksi Prof. Dr. Volker Schmidt

S1/01 - A2
11:45
Lecture C02: Going 3D: From Image to Knowledge
C02.2: Session 2 C02: Going 3D: From Image to Knowledge
C02.2: Session 2
Session starts at 11:15

A new Image Segmentation Tool powered by Machine Learning

Tobias Volkenandt Stefanie Freitag Dr. Michael Rauscher

S1/01 - A04
Lecture P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.2: Session 2 P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.2: Session 2
Session starts at 11:15

Crystallinity and texture of nanostructured Mo thin films deposited obliquely at room temperature

Susann Liedtke-Grüner Christoph Grüner Dr. Juergen W. Gerlach Michael Mensing Philipp Schumacher Dr. Andriy Lotnyk Prof. Dr. Bernd Rauschenbach

S1/03 - 226
Lecture S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II
Session starts at 11:15

Microstructure and mechanical properties of additively manufactured IN718 after different heat treatments

Benedikt Diepold Dr. Steffen Neumeier Prof. Mathias Göken Martin Pröbstle

S1/01 - A3
Highlight Lecture F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.1: Anisotropy and Modelling F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.1: Anisotropy and Modelling
Session starts at 11:15

Reverse engineering the kinetics of grain growth

Prof. Carl E. Krill Mingyan Wang Jules M. Dake Dr. Søren Schmidt

S1/03 - 223
Lecture F06: Materials Design for Electrochemical Energy Storage
F06.2: Electrode and Cell Simulation F06: Materials Design for Electrochemical Energy Storage
F06.2: Electrode and Cell Simulation
Session starts at 11:15

Stochastic microstructure modeling of aggregate particles in hierarchically structured electrodes

Matthias Neumann Sven Wetterauer Markus Osenberg Dr. André Hilger Dr. Amalia Wagner NIcole Bohn Dr. Joachim Binder Dr. Ingo Manke Dr. Thomas Carraro Prof. Dr. Volker Schmidt

S1/03 - 221
Lecture P08: Damage in Metal Forming
P08.1: Session 1 P08: Damage in Metal Forming
P08.1: Session 1
Session starts at 11:15

The effect of forming-induced damage on fatigue properties of 16MnCrS5 steels

Lisa Samfaß Prof. Dr. Frank Walther

S1/03 - 283
12:00
Lecture C02: Going 3D: From Image to Knowledge
C02.2: Session 2 C02: Going 3D: From Image to Knowledge
C02.2: Session 2
Session starts at 11:15

Machine learning as a tool for quantification and evaluation of micrographs

Andreas Jansche Prof. Dr. Gerhard Schneider Prof. Dr. Ricardo Büttner Dr. Timo Bernthaler Hermann Baumgartl Andreas Kopp David Vogelgsang Florian Trier Amit-Kumar Choudhary Olatomiwa Badmos

S1/01 - A04
Lecture C05: Small Scale and In Situ Mechanical Testing
C05.5: Indentation II C05: Small Scale and In Situ Mechanical Testing
C05.5: Indentation II
Session starts at 11:15

Metallic Nanoimprinting – Nanoscale surface structuring by confined plastic deformation

Paul Braun Prof. Dr. Karsten Durst Christopher Schmidt

S1/01 - A03
Lecture S08: Advanced Steels
S08.1: INCROHSS Seminar: Intercritical Rolling of High Strength Steels S08: Advanced Steels
S08.1: INCROHSS Seminar: Intercritical Rolling of High Strength Steels
Session starts at 11:15

Microstructural characterization procedure using EBSD technique for intercritically deformed low carbon steels

Ph.D. Unai Mayo Ijurra Dr. Nerea Isasti Gordobil Dr. Pello Uranga Zuaznabar Prof. Dr. Jose María Rodriguez Ibabe

S1/01 - A4
Highlight Lecture F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.1: Anisotropy and Modelling F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.1: Anisotropy and Modelling
Session starts at 11:15

Missing Variables in Grain Growth

Dr. Daniel Lewis Dr. Catherine Bishop

S1/03 - 223
Lecture S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II
Session starts at 11:15

On the evolution of microstructure of LBM-processed H13 tool steel upon heat treatment

Liang Wu Fengchen Xia Witalij Gridin Dr. Leuders Stefan Prof. Dr. Thomas Niendorf

S1/01 - A3
Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.5: Mechanical Properties of Tungsten S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.5: Mechanical Properties of Tungsten
Session starts at 11:15

Thermal stability of warm-rolled tungsten in the temperature range from 1150 °C to 1300 °C

Dipl.-Ing. Umberto Maria Ciucani Dr. Wolfgang Pantleon

S1/01 - A1
12:15
Lecture S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.1: Materials Tribology S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.1: Materials Tribology
Session starts at 11:15

How normal load influences the microstructure evolution in copper under reciprocating tribological loading

Friederike Ruebeling Dr. Gunther Richter Prof. Dr. Peter Gumbsch Dr. Christian Greiner

S1/01 - A5
Lecture S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II
Session starts at 11:15

Micro-mechanical modelling of additively manufactured 316L stainless steel using selective laser melting

Abhishek Biswas Mahesh Prasad Dr. Napat Vajragupta Dr. Hamad ul Hassan Florian Brenne Prof. Dr. Thomas Niendorf Prof. Dr. Alexander Hartmaier

S1/01 - A3
Lecture F06: Materials Design for Electrochemical Energy Storage
F06.2: Electrode and Cell Simulation F06: Materials Design for Electrochemical Energy Storage
F06.2: Electrode and Cell Simulation
Session starts at 11:15

Microstructural cathode design of lithium-ion batteries and its impact on the effective electronic and ionic conductivity using discrete element methods

Oleg Birkholz Prof. Dr. Marc Kamlah Dr. Yixiang Gan

S1/03 - 221
Lecture C05: Small Scale and In Situ Mechanical Testing
C05.5: Indentation II C05: Small Scale and In Situ Mechanical Testing
C05.5: Indentation II
Session starts at 11:15

Parameterization of a nonlocal crystal plasticity model for lath martensite using nanoindentation

Jenni Kristin Engels Prof. Alexander Hartmaier Dr. Napat Vajragupta

S1/01 - A03
Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.5: Mechanical Properties of Tungsten S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.5: Mechanical Properties of Tungsten
Session starts at 11:15

Tungsten (W): from the bulb wire to a structural material

Dr. Jens Reiser Simon Bonk Carsten Bonnekoh Philipp Lied Dr. Andreas Hoffmann

S1/01 - A1
12:30
Lecture C02: Going 3D: From Image to Knowledge
C02.2: Session 2 C02: Going 3D: From Image to Knowledge
C02.2: Session 2
Session starts at 11:15

3D-characterization of deuterium distributions in oxides on Zircaloy-4 using NanoSIMS

Dr. Kexue Li Dr. Thomas Aarholt Junliang Liu Dr. Helen Hulme Dr. Alistair Garner Prof. Dr. Michael Preuss Prof. Dr. Sergio Lozano-Perez Prof. Dr. Chris Grovenor

S1/01 - A04
Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.5: Mechanical Properties of Tungsten S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.5: Mechanical Properties of Tungsten
Session starts at 11:15

How to get away with tungsten – lessons learned on improving its mechanical properties

Dr. Stefan Wurster Vladica Nikolic Dr. Daniel Scheiber Dr. Hong Li Dr. Lorenz Romaner Dr. Bernd Gludovatz Prof. Dr. Reinhard Pippan

S1/01 - A1
Lecture S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II
Session starts at 11:15

Mechanical properties of nano structured eutectic NiAl-Cr(Mo) in-situ composites processed by additive manufacturing

Andreas Förner Sven Giese Dr. Steffen Neumeier Prof. Dr. Peter Felfer Prof. Dr. Carolin Körner Prof. Dr. Mathias Göken

S1/01 - A3
Lecture M02: Atomistic Methods for Designing
M02.2: Cellular and Granular Porous Microstructures M02: Atomistic Methods for Designing
M02.2: Cellular and Granular Porous Microstructures
Session starts at 11:15

Multiphase-field simulation of coarsening in an SOFC-anode under surface and grain boundary self-diffusion

Paul Hoffrogge Dr. Daniel Schneider Prof. Dr. Britta Nestler Patricia Haremski Dr. Matthias Wieler Dr. Piero Lupetin

S1/01 - A2
Highlight Lecture F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.1: Anisotropy and Modelling F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.1: Anisotropy and Modelling
Session starts at 11:15

Solid State Sintering: A Phase-field approach

Dr. Johannes Hötzer Marco Seiz Michael Kellner Prof. Dr. Wolfgang Rheinheimer Prof. Dr. Britta Nestler

S1/03 - 223
Lecture S08: Advanced Steels
S08.1: INCROHSS Seminar: Intercritical Rolling of High Strength Steels S08: Advanced Steels
S08.1: INCROHSS Seminar: Intercritical Rolling of High Strength Steels
Session starts at 11:15

Texture evolutions in heavy gauge steel plates after inter-critical rolling at high temperatures

Dr. Minh Tuan Nguyen Dr. Matteo Caruso Dr. Ulrike Lorenz Prof. Dr. Jilt Sietsma Prof. Dr. Roumen Petrov

S1/01 - A4
15:15
Highlight Lecture P08: Damage in Metal Forming
P08.2: Session 2 P08: Damage in Metal Forming
P08.2: Session 2
Session starts at 14:45

Damage evolution of high-strength multiphase steels and its influence on local formability

Sebastian Heibel Dr. Winfried Nester Dr. Till Clausmeyer Prof. Dr. Erman Tekkaya

S1/03 - 283
Lecture C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.1: Session 1 C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.1: Session 1
Session starts at 14:45

Influence of focused ion beam sample preparation on the microstructure of zirconia

Dr. Harry Berek Prof. Dr. Christos G. Aneziris

S1/01 - A02
Lecture F06: Materials Design for Electrochemical Energy Storage
F06.3: Processing Aspects F06: Materials Design for Electrochemical Energy Storage
F06.3: Processing Aspects
Session starts at 14:45

Investigating the relationship between compaction load and the 3D microstructure of cathodes in lithium-ion batteries

Benedikt Prifling Klaus Kuchler Denny Schmidt Dr. Henning Markötter Dr. Ingo Manke Prof. Dr. Volker Knoblauch Prof. Dr. Volker Schmidt

S1/03 - 221
Lecture S08: Advanced Steels
S08.2: Stainless Steels S08: Advanced Steels
S08.2: Stainless Steels
Session starts at 14:45

Precipitation behavior and corrosion resistance of nickel-free, high-nitrogen austenitic stainless steels

Dipl.-Ing. Paul Rosemann Patricia Pensel Saskia Roßberg Christopher Müller Dr. Andreas Burkert

S1/01 - A4
Lecture F02: Surface Engineering and Functionalisation
F02.3: Corrosion and Wear Protection Control F02: Surface Engineering and Functionalisation
F02.3: Corrosion and Wear Protection Control
Session starts at 14:45

Surface integrity analysis of ADI and IADI after manufacturing processes

Dipl.-Ing. Maria Emilia Furno Prof. Dr. Diego Alejandro Colombo Dr. Amadeo Daniel Sosa

S1/03 - 123
Lecture S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.2: Third Body Formation S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.2: Third Body Formation
Session starts at 14:45

The influence of heat treatment on the third body formation of AlSi9Cu3

Dr. Dominic Linsler Prof. Dr. Martin Dienwiebel

S1/01 - A5
16:45
Highlight Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.7: Special Session on Light Weight Metals S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.7: Special Session on Light Weight Metals
Session starts at 16:45

Challenges and Solutions in the Development of Magnesium Sheets

Dr. Dietmar Letzig Dr. Sangbong Yi Dr. Jose Victoria-Hernandez Dr. Gerrit Kurz Dr. Jan Bohlen

S1/01 - A1
Keynote Lecture C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.1: X-ray Microtomography: Characterisation C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.1: X-ray Microtomography: Characterisation
Session starts at 16:45

Characterization of metallic and non-metallic microstructures by X-ray micro- and nano-computed tomography – implications for new materials design and structure-function relations

Dr. Simon Zabler Maximilian Ullherr Dr. Christoph Schweizer Dr. Astrid Hölzing Dr. Christian Fella Prof. Dr. Randolf Hanke

S1/01 - A03
Highlight Lecture F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.3: Structure and Thermodynamics F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.3: Structure and Thermodynamics
Session starts at 16:45

Effect of solute segregation on the stability and evolution of microstructures

Prof. Dr. Reiner Kirchheim

S1/03 - 223
Keynote Lecture S08: Advanced Steels
S08.3: Processing, Microstructure and Mechanical Properties S08: Advanced Steels
S08.3: Processing, Microstructure and Mechanical Properties
Session starts at 16:45

Mechanical Properties of Carbide-free Bainitic High Silicon Cast Steels

Prof. Dr. Roberto Boeri Nicolás Tenaglia Dr. Alejandro Basso Prof. Dr. Juan Miguel Massone

S1/01 - A4
Keynote Lecture S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.3: Recent Trends in Tribology S02: Experiments and Simulations Towards Understanding Tribology Across Length-Scales
S02.3: Recent Trends in Tribology
Session starts at 16:45

The importance of tribofilm formation for metal matrix composites

Prof. Richard Chromik

S1/01 - A5
17:30
Lecture M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.4: Nickel-base Materials Systems M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.4: Nickel-base Materials Systems
Session starts at 16:45

A high temperature creep model for Ni-based single crystal superalloys

Ph.D. Hao Yu Prof. Dr. Sybrand van der Zwaag Prof. Dr. Wei Xu

S1/01 - A01
Lecture S08: Advanced Steels
S08.3: Processing, Microstructure and Mechanical Properties S08: Advanced Steels
S08.3: Processing, Microstructure and Mechanical Properties
Session starts at 16:45

Additive Manufacturing of Advanced High-Strength Steels

Dr.-Ing. Christian Haase Fabian Kies Patrick Köhnen Dr. Andreas Weisheit Prof. Dr. Johannes Henrich Schleifenbaum

S1/01 - A4
Lecture C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.2: Session 2 C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.2: Session 2
Session starts at 16:45

Advanced characterization of microstructure, stress state and thermo-mechanical properties of nanostructured materials by in-situ synchrotron X-ray diffraction

Prof. Dr. Rostislav Daniel Michael Meindlhumer Stefan Klima Nikolaus Jäger Dr. Hynek Hruby Dr. Andreas Stark Dr. Manfred Burghammer Prof. Dr. Christian Mitterer Prof. Dr. Jozef Keckes

S1/01 - A02
Lecture C02: Going 3D: From Image to Knowledge
C02.4: Session 4 C02: Going 3D: From Image to Knowledge
C02.4: Session 4
Session starts at 16:45

Computerized Stereological Analysis in Abrasive Wear Applications

Dipl.-Ing. Santiago Manuel Benito Dr. Fabian Pöhl

S1/01 - A04
18:30
Lecture M04: Predicting Interface Structure and Dynamics – From Atomic- to Meso-Scale
M04.1: Phase Interfaces M04: Predicting Interface Structure and Dynamics – From Atomic- to Meso-Scale
M04.1: Phase Interfaces
Session starts at 18:00

Combined first principles and finite element modelling of micromechanical effects of Mo2C precipitates in steel

Daniel Scheiber Silvia Brunbauer Dr. Jürgen Spitaler Dr. Werner Ecker

S1/01 - A5
Lecture M08: Integrated Computational Materials Engineering (ICME)
M08.3: Microstructure and Process Simulation M08: Integrated Computational Materials Engineering (ICME)
M08.3: Microstructure and Process Simulation
Session starts at 18:00

Grain growth controlled by grain boundary and triple junction migration

Prof. Ernst Gamsjäger Daniel M. Ogris Dr. Jiri Svoboda

S1/01 - A3
Keynote Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.8: Special Session on Light Weight Metals S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.8: Special Session on Light Weight Metals
Session starts at 18:00

Metal-Al Matrix Nanocomposites

Prof. Dr. Fernando Audebert Prof. Marina Galano

S1/01 - A1
Lecture S08: Advanced Steels
S08.4: Processing, Microstructure and Mechanical Properties II S08: Advanced Steels
S08.4: Processing, Microstructure and Mechanical Properties II
Session starts at 18:00

Micromechanical modeling of DP600 steel: from microstructure to the sheet metal forming process

Dr.-Ing. Napat Vajragupta Sascha Maassen Dr. Dominik Brands Dr. Till Clausmeyer Prof. Dr. Jörg Schröder Prof. Dr. Alexander Hartmaier

S1/01 - A4
Lecture B03: Degradation Mechanisms and Characterization of Biodegradable Materials
B03.2: Session 2 B03: Degradation Mechanisms and Characterization of Biodegradable Materials
B03.2: Session 2
Session starts at 18:00

Microstructure-property correlation of extruded Mg2GdxAg alloys

Dr. Norbert Hort Alex Kaine Dr. Jan Bohlen Dr. Björn Wiese Dr. Frank Feyerabend Yiyi Lu Prof. Dr. Karl Ulrich Kainer

S1/03 - 23

Friday (28.09.2018)

9:15
Lecture S08: Advanced Steels
S08.5: Low Carbon and Microalloyed Steels S08: Advanced Steels
S08.5: Low Carbon and Microalloyed Steels
Session starts at 09:15

Effect of post-rolling induction treatment on tensile and toughness properties in low carbon microalloyed plates

Dr. Pello Uranga Dr. Gorka Larzabal Prof. Dr. Jose M Rodriguez-Ibabe Dr. Nerea Isasti

S1/01 - A4
Keynote Lecture B04: From Old Creatures to New Concepts: Bioinspired Material Designs and Processing Strategies
B04.1: Bioinspired Mineralization B04: From Old Creatures to New Concepts: Bioinspired Material Designs and Processing Strategies
B04.1: Bioinspired Mineralization
Session starts at 09:15

Fabrication of artificial mineral films similar to biogenic membranes consisting of oriented nanorod arrays through classical and nonclassical routes

Prof. Dr. Hiroaki Imai

S1/01 - A01
Keynote Lecture C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.4: Session 4 C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.4: Session 4
Session starts at 09:15

In-situ Characterization of Phase Transformations: Dendritic Solidification

Prof. Peter Voorhees Yue Sun Ahmet Cecen Surya Kalidindi Tiberiu Stan

S1/01 - A02
Keynote Lecture S01: Environmentally Assisted Cracking of High-Strength Alloys
S01.1: Hydrogen Embrittlement in Carbon and Low Alloy Steels S01: Environmentally Assisted Cracking of High-Strength Alloys
S01.1: Hydrogen Embrittlement in Carbon and Low Alloy Steels
Session starts at 09:15

Understanding the interaction between a steel microstructure and hydrogen: the key to develop more hydrogen resistant materials

Prof. Dr. Kim Verbeken Dr. Tom Depover

S1/01 - A2
9:45
Lecture B02: Bioinstructive Hydrogels
B02.1: Session 1 B02: Bioinstructive Hydrogels
B02.1: Session 1
Session starts at 09:15

3D Microsarchitectured and Biofunctionalized Hydrogel Tool-box to Control Cellular Behaviour of Cells

Katharina Siemsen Florian Ceynowa Prof. Dr. Rainer Adelung Prof. Dr. Christine Selhuber-Unkel

S1/01 - A04
Lecture C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.4: Session 4 C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.4: Session 4
Session starts at 09:15

Advances in 3D Grain Mapping with LabDCT

Dr. Nicolas Gueninchault Dr. Flroian Bachmann Dr. Erik Lauridsen Dr. Christian Holzner Dr. Hrishikesh Bale

S1/01 - A02
Lecture P06: Molecular Preparative Approaches to Functional Materials
P06.3: Carbon-Based Functional Materials P06: Molecular Preparative Approaches to Functional Materials
P06.3: Carbon-Based Functional Materials
Session starts at 09:15

Co-containing (oxy)carbide derived carbons as electrodes for supercapacitors

Dr. Aitana Tamayo Daniel Nuñez Dr. Mª. Angeles Rodriguez Dr. Fausto Rubio

S1/03 - 283
Lecture F07: The Great Transition - The Importance of Critical Metals for Green Energy Technologies
F07.1: Session 1 F07: The Great Transition - The Importance of Critical Metals for Green Energy Technologies
F07.1: Session 1
Session starts at 09:15

Development of a Co-free superaustenitic stainless cast steel for high-temperature applications

Frederic van gen Hassend Prof. Dr. Sebastian Weber

S1/03 - 123
Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.9: Nanostructured Alloy Design S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.9: Nanostructured Alloy Design
Session starts at 09:15

Influence of stacking fault energy and solid solution strengthening on structure evolution and mechanical properties of Cu-X alloys after severe plastic deformation

Prof. Dr. Karsten Durst Dr. Enrico Bruder

S1/01 - A1
Lecture C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.3: Time-Resolved Synchrotron X-ray Imaging C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.3: Time-Resolved Synchrotron X-ray Imaging
Session starts at 09:15

X-Ray Tomoscopy: Beyond real-time tomography

Dr. Francisco Garcia-Moreno Dr. Paul H. Kamm Dr. Tillmann R. Neu Dr. Christian M. Schlepütz Prof. Dr. John Banhart

S1/01 - A03
10:15
Lecture S01: Environmentally Assisted Cracking of High-Strength Alloys
S01.1: Hydrogen Embrittlement in Carbon and Low Alloy Steels S01: Environmentally Assisted Cracking of High-Strength Alloys
S01.1: Hydrogen Embrittlement in Carbon and Low Alloy Steels
Session starts at 09:15

Effect of nickel content in sulfide stress cracking of low alloy steels

Dr.-Ing. Mariano Kappes Dannisa Chalfoun Prof. Dr. Ricardo M. Carranza Prof. Dr. Mariano Iannuzzi

S1/01 - A2
Lecture M04: Predicting Interface Structure and Dynamics – From Atomic- to Meso-Scale
M04.2: Grain Boundaries I M04: Predicting Interface Structure and Dynamics – From Atomic- to Meso-Scale
M04.2: Grain Boundaries I
Session starts at 09:15

Effect of precipitation on grain boundary diffusion in Al-based alloys

Ankit Gupta Vladislav Kulitcki Bengü Tas Kavakbasi Dr. Yulia Buranova Prof. Dr. Jörg Neugebauer Prof. Dr. Gerhard Wilde Dr. Tilmann Hickel Dr. Sergiy V. Divinski

S1/01 - A5
Lecture P03: Coatings and Thin Films for Structural and Functional Applications
P03.1: Session 1 P03: Coatings and Thin Films for Structural and Functional Applications
P03.1: Session 1
Session starts at 09:15

On the deformation of highly oriented Ti(C,N) CVD hard coatings

Ph.D. Linus von Fieandt Dr. Tommy Larsson Dr. Erik Lindahl Prof. Mats Boman Prof. Mats Halvarsson Dr. Olof Bäcke

S1/03 - 226
Keynote Lecture P06: Molecular Preparative Approaches to Functional Materials
P06.3: Carbon-Based Functional Materials P06: Molecular Preparative Approaches to Functional Materials
P06.3: Carbon-Based Functional Materials
Session starts at 09:15

Solvent-Assisted Single-Source Precursor-Derived Ceramics with Tailored Porosity

Prof. Dr. Ralf Riedel Dr. Magdalena Graczyk-Zajac Dr. Dragoljub Vrankovic

S1/03 - 283
Keynote Lecture S04: Micro- and Nanoarchitected Materials
S04.1: Topology, Materials & Techniques I S04: Micro- and Nanoarchitected Materials
S04.1: Topology, Materials & Techniques I
Session starts at 09:15

Topological Optimization, Textile Manufacturing, and Characterization of 3D Lattice Materials

Prof. Kevin Hemker

S1/01 - A3
11:15
Highlight Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.10: Mechanical Properties of Advanced Steels S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.10: Mechanical Properties of Advanced Steels
Session starts at 11:15

Effect of ultrafast heating on properties of a low carbon steel on macro- and micro-scales

Dr. Ilchat Sabirov Miguel Angel Valdes Florian Vercruysse Prof. Roumen Petrov Dr. Miguel Monclus Dr. Jon Molina-Aldareguia

S1/01 - A1
Keynote Lecture C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.4: Characterisation of Lightweight Alloys by Synchrotron Imaging C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.4: Characterisation of Lightweight Alloys by Synchrotron Imaging
Session starts at 11:15

In situ damage characterization in tensile deformed cast AlSi12Ni

Prof. Helmut Klöcker Dr. Aly Tireira Prof. Andras Borbély Prof. Guillermo Requena Dr. Michel Bornert

S1/01 - A03
Lecture S01: Environmentally Assisted Cracking of High-Strength Alloys
S01.2: Hydrogen Embrittlement in Corrosion Resistant and High Entropy Alloys S01: Environmentally Assisted Cracking of High-Strength Alloys
S01.2: Hydrogen Embrittlement in Corrosion Resistant and High Entropy Alloys
Session starts at 11:15

Nano- micro mechanical behavior of Ni alloys

Tarlan Hajilou Prof. Afrooz Barnoush

S1/01 - A2
11:45
Lecture S01: Environmentally Assisted Cracking of High-Strength Alloys
S01.2: Hydrogen Embrittlement in Corrosion Resistant and High Entropy Alloys S01: Environmentally Assisted Cracking of High-Strength Alloys
S01.2: Hydrogen Embrittlement in Corrosion Resistant and High Entropy Alloys
Session starts at 11:15

Hydrogen stress cracking of age hardenable nickel alloys

Prof. Mariano Iannuzzi

S1/01 - A2
Lecture C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.4: Characterisation of Lightweight Alloys by Synchrotron Imaging C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.4: Characterisation of Lightweight Alloys by Synchrotron Imaging
Session starts at 11:15

In-situ determination of the influence of composition and test-temperature on the damage accumulation of Al-Si piston alloys

Dipl.-Ing. Katrin Bugelnig Dr. Federico Sket Dr. Holger Germann Dr. Thomas Steffens Dr. Jérôme Adrien Dr. Eric Maire Elodie Boller Fabian Wilde Prof. Dr. Guillermo Requena

S1/01 - A03
Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.10: Mechanical Properties of Advanced Steels S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.10: Mechanical Properties of Advanced Steels
Session starts at 11:15

Microstructural design for performance tailoring in high chromium cast irons

Dr.-Ing. Maria Agustina Guitar Lucia Campo Dominik Britz Prof. Dr. Frank Mücklich

S1/01 - A1
12:00
Lecture P03: Coatings and Thin Films for Structural and Functional Applications
P03.2: CREATe-Network (Horizon 2020 - RISE-Project of the European Commission) P03: Coatings and Thin Films for Structural and Functional Applications
P03.2: CREATe-Network (Horizon 2020 - RISE-Project of the European Commission)
Session starts at 11:15

Effect of Binder Composition and Coating on Corrosion and Fatigue Damage of Cemented Carbides

Prof. Dr. Silvia Simison Dr. Lisandro Escalada Prof. Dr. Amadeo Sosa Prof. Dr. Emilio Jimenez Prof. Dr. Joan Roa Verónica Collado Prof. Dr. José García

S1/03 - 226
Lecture F08: Advanced Materials for Lithium and Post-Lithium Batteries
F08.2: Electrode Materials II and Solid State Batteries F08: Advanced Materials for Lithium and Post-Lithium Batteries
F08.2: Electrode Materials II and Solid State Batteries
Session starts at 11:15

Interface formation and properties in a NaxCoO2/Nasicon/Na all-solid-state battery

Philipp Kehne Conrad Guhl Dr. Qianli Ma Dr. Frank Tietz Prof. Dr. Wolfram Jaegermann Prof. Dr. Lambert Alff Dr. René Hausbrand Dr. Philipp Komissinskiy

S1/03 - 221
Lecture C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.5: Session 5 C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.5: Session 5
Session starts at 11:15

Shape memory alloy grids for in situ straining in the TEM

Torben Dankwort Ulrich Schürmann Christoph Chluba Niklas Wolff Daria Smazna Rodrigo Lima de Miranda Philipp Junker Rainer Adelung Eckhard Quandt Lorenz Kienle

S1/01 - A02
Lecture C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.4: Characterisation of Lightweight Alloys by Synchrotron Imaging C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.4: Characterisation of Lightweight Alloys by Synchrotron Imaging
Session starts at 11:15

Synchrotron X-ray Imaging and Tomography Studies of the Evolution of Fe-Rich Intermetallic Phases in Recycled Al Alloys by External Fields

Billy Koe Dr. Thomas Connolley Prof. Jiawei Mi Du Wenjia

S1/01 - A03
12:15
Lecture S04: Micro- and Nanoarchitected Materials
S04.2: Topology, Materials & Techniques II S04: Micro- and Nanoarchitected Materials
S04.2: Topology, Materials & Techniques II
Session starts at 11:15

Electrodeposition and mechanical testing of 3D microstructures

Dr. Rajaprakash Ramachandramoorthy Dr. Maxime Mieszala Patrik Schürch Dr. Laetitia Philippe Dr. Johann Michler

S1/01 - A3
Lecture M04: Predicting Interface Structure and Dynamics – From Atomic- to Meso-Scale
M04.3: Grain Boundaries II M04: Predicting Interface Structure and Dynamics – From Atomic- to Meso-Scale
M04.3: Grain Boundaries II
Session starts at 11:15

Lattice structure disorder in multi-domain nanomaterials

Dr. Alberto Leonardi Prof. Dr. Michael Engel

S1/01 - A5
Lecture C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.4: Characterisation of Lightweight Alloys by Synchrotron Imaging C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.4: Characterisation of Lightweight Alloys by Synchrotron Imaging
Session starts at 11:15

Microstructure of Mg-Zn-Nd alloys: phases, morphologies

Dr. Norbert Hort Dr. Domonkos Tolnai Dr. Sarkis Gavras Dr. Tungky Sosro Ricardo Henrique Buzolin

S1/01 - A03
Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.10: Mechanical Properties of Advanced Steels S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.10: Mechanical Properties of Advanced Steels
Session starts at 11:15

Multi-Pass High-Pressure Sliding (MP-HPS) for Superplasticity in Metallic Round Rods

Dr. Yongpeng Tang Kosei Sumikawa Dr. Yoichi Takizawa Manabu Yumoto Yoshiharu Otagiri Prof. Dr. Zenji Horita

S1/01 - A1
14:45
Keynote Lecture P03: Coatings and Thin Films for Structural and Functional Applications
P03.3: Session Dedicated to the Memory of Prof. Dr. rer. nat. Monika Willert-Porada P03: Coatings and Thin Films for Structural and Functional Applications
P03.3: Session Dedicated to the Memory of Prof. Dr. rer. nat. Monika Willert-Porada
Session starts at 14:45

Design of CVD coatings for milling inserts - connecting microstructure and thermal cycling residual stress behavior

Dr. José Luis Garcia Dr. Martina Lattemann Maiara Fernanda Moreno Prof. Dr. Haroldo Pinto Dr. Manuela Klaus Prof. Dr. Christoph Genzel

S1/03 - 226
Lecture S08: Advanced Steels
S08.7: Medium and High Manganese Steels S08: Advanced Steels
S08.7: Medium and High Manganese Steels
Session starts at 14:45

Microstructure and mechanical properties of cold-rolled medium-Mn steel Fe-12Mn-3Al-0.05C

Yan Ma Dr. Wenwen Song Prof. Dr. Wolfgang Bleck

S1/01 - A4
Highlight Lecture C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.5: Exploiting Contrast with Synchrotron X-rays and Neutrons C03: Tomographic and Radiographic Imaging with Synchrotron X-rays and Neutrons: Exploiting Contrast and Time
C03.5: Exploiting Contrast with Synchrotron X-rays and Neutrons
Session starts at 14:45

Phase contrast microtomography and second harmonic generation reveal a lamellated arrangement motif of the anosteocytic bone material of fish

Dr. Paul Zaslansky Katrein Sauer Prof. Dr. Ron Shahar

S1/01 - A03

Poster S09: Light Weight Metals
Session starts at 09:30

Accelerating the isothermal forging process of titanium aluminides by microstructure adaptive speed control

Mark Eisentraut Johan Andreas Stendal

Poster S08: Advanced Steels
Session starts at 09:30

An Eshelby inclusion based model for cementite variants in hypereutectoid steel

Dipl.-Ing. Marko Vogric Dr. Erwin Povoden-Karadeniz

Poster P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
Session starts at 09:30

Anisotropic behaviors in metallic thin films obliquely sputter-deposited

Ph.D. Raya El Beainou Asma CHARGUI Dr. Etienne COFFY Dr. Paulo PEDROSA Dr. Alexis MOSSET Dr. Sébastien EUPHRASIE Prof. Dr. Pascal VAIRAC Prof. Dr. Nicolas MARTIN

Poster S05: Bulk Ultrafine- and Nano-Structured Materials
Session starts at 09:30

Characterization and Thermal Stability of Pulsed Electrodeposited Nanocrystalline Co-Cu

Dipl.-Ing. Killang Pratama Prof. Dr. Christian Motz

Poster C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
Session starts at 09:30

Corrosion resistance, wear behavior and residual stress for Ti/TiN coatings deposited on nitrided AISI 316L by cathodic arc

Prof. Dr. Sonia Brühl Laura Vaca Prof. Dr. Daniel Vega Prof. Dr. Adriana Marquez Ph.D. Juan Pablo Quintana

Poster S05: Bulk Ultrafine- and Nano-Structured Materials
Session starts at 09:30

Determination of average grain size and grain size distributions of nanocrystalline materials - a comparative study including t-EBSD, TEM and XRD

Dr. Christian Braun Jörg Schmauch Michael Johannes Deckarm Prof. Dr. Rainer Birringer

Poster F04: Functional Materials for Energy Applications
Session starts at 09:30

Effect of CoOx nanoparticles decoration in the La0.6Sr0.4Co0.2Fe0.8O3-d performance as cathode.

Dr.-Ing. Catalina Jiménez Julian Ascolani-Yael Dr. Alejandra Montenergro-Hernandez Prof. Dr. Liliana Mogni

Poster S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
Session starts at 09:30

Effect of Mn partition on the mechanical properties of Dual Phase steel

Prof. Dr. Iris Alvarez Dr. Marcela Balbi Francisco Farias

Poster S09: Light Weight Metals
Session starts at 09:30

Effect of ternary elements on the eutectic temperature and microstructure in TiAl-x (x=Nb,Cr,Zr)

Fabian Kathöfer

Poster M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
Session starts at 09:30

Elasto-plastic multiphase-field modeling of martensitic phase transformation in a dual-phase microstructure

Ephraim Schoof Christoph Herrmann Dr. Daniel Schneider Dr. Michael Selzer Prof. Dr. Britta Nestler

Poster P01: Manipulation of Matter by Electric and Magnetic Fields
Session starts at 09:30

Electric Field Enhanced Sintering of Nanocrystalline Fe-Based Alloys

Thomas Brede Moritz Roscher Tarini P. Mishra Prof. Dr. Reiner Kirchheim Prof. Dr. Cynthia Volkert

Poster P01: Manipulation of Matter by Electric and Magnetic Fields
Session starts at 09:30

Flash sintering for BaTiO3 with AC-pulsed electric fields

Dipl.-Ing. Ryosuke Umemura Prof. Dr. Hidehiro YOSHIDA Prof. Dr. Tomoharu TOKUNAGA Prof. Dr. Takahisa YAMAMOTO

Poster P01: Manipulation of Matter by Electric and Magnetic Fields
Session starts at 09:30

Heat-assisted flash sintering for highly densified 3mol%Y2O3-doped ZrO2

Dipl.-Ing. Yudai Yamashita Prof. Dr. Hidehiro YOSHIDA Prof. Dr. Tomoharu TOKUNAGA Prof. Dr. Takahisa YAMAMOTO Tetsuro KOBAYASHI

Poster S04: Micro- and Nanoarchitected Materials
Session starts at 09:30

Hierarchical porous sioc-based ceramics developed from infiltration of poplar templates with a polysilsesquioxane

Dr. Maria Andrea Camerucci Prof. Carol Stephany Certuche-Arenas Dr. María Laura Sandoval

Poster S09: Light Weight Metals
Session starts at 09:30

Hydrogen-Induced Microstructure Optimization of the Ti-6Al-4V

Mohammed Kasim Mohsun Prof. Dr. Hans-Jürgen Christ

Poster P01: Manipulation of Matter by Electric and Magnetic Fields
Session starts at 09:30

In-Situ SEM and TEM Studies of Electric Field Enhanced Sintering of ZnO

Danny Schwarzbach Dr. Jesus Gonzalez-Julian Prof. Dr. Olivier Guillon Dr. Vladimir Roddatis Prof. Dr. Cynthia Volkert

Poster P03: Coatings and Thin Films for Structural and Functional Applications
Session starts at 09:30

Influence of powder feeding rates at mechanical properties and microstructure of tungsten carbide based powder

Jan Schubert Dr. Zdeněk Česánek Dr. Šárka Houdkova

Poster S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
Session starts at 09:30

Injected polymer blends and composites: processing-morphology-performance relationship

Dr.-Ing. Valeria Pettarin Caren Rosales Dr. Maria Alejandra Costantino Prof. Dr. Celina Raquel Bernal

Poster C05: Small Scale and In Situ Mechanical Testing
Session starts at 09:30

Interaction of porosity and strain hardening affects the energy absorption efficienc of austenitic stainless steel foams

Prof. Dr. Claudia Fleck Dr. Ali Can Kaya Prof. Dr. Mehmet Ipekoglu Dr. Paul Zaslansky

Poster M01: Computational and Experimental Thermodynamics and Kinetics of Materials
Session starts at 09:30

Kinetics of carbide precipitation in a HSLA steel during advanced thermo-mechanical control process

Leandro Nakamura Dr. Maria Agustina Guitar Dominik Britz Dr. Bastian Philippi Dr. Eric Detemple Prof. Dr. Frank Mücklich

Poster Z01: Argentinean-German Collaboration in Materials Science and Engineering
Session starts at 09:30

Laser texturing combined with plasma nitriding as a tool to control the tribological performance of steel components

Prof. Dr.-Ing. Andrés Fabián Lasagni Eugenia Dalibón Ignacio Tabares Alfredo Aguilar Prof. Dr. Sonia Brühl

Poster P04: Nanocomposites and Nanolaminated Functional Coatings
Session starts at 09:30

Mechanical Properties of CrN/TiN superlattices from ab inito calculations

Dipl.-Ing. Lukas Löfler Dr. Matthias Bartosik Prof. Dr. Paul Mayrhofer Dr. David Holec

Poster F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
Session starts at 09:30

Mechanical behavior of bismuth sodium titanate by nanoindentation

Angelica Maria Benitez Castro Dr. Juan Muñoz Saldaña

Poster S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
Session starts at 09:30

Mechanical properties of HPT-deformed Nickel/carbon nanotube composites

Dipl.-Ing. Andreas Katzensteiner Timo Mueller Prof. Dr. Reinhard Pippan Dr. Andrea Bachmaier

Poster Z01: Argentinean-German Collaboration in Materials Science and Engineering
Session starts at 09:30

Mechanical spectroscopy study at different temperatures of a rapidly solidified and extruded Al-13Mg-7Si-2Cu alloy

Sebastian Carl Greco Prof. Dr. Fabiana Saporiti Prof. Dr. Hans-Rainer Sinning Prof. Dr. Fernando Audebert

Poster C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
Session starts at 09:30

Microscopic investigation of the layer morphology of cathode foils for Li-ion batteries

Andreas Kopp Dr. Anke Dutschek Dr. Timo Bernthaler Prof. Dr. Gerhard Schneider

Poster F01: High-Temperature Functional Materials
Session starts at 09:30

Microstructure and creep/dwell-time fatigue properties of a hot extruded polycrystalline superalloy (AD730)

Anne Hesselink Mikhail Solovev Prof. Dr. Ulrich Krupp Prof. Dr. Bernhard Adams

Poster P07: Joining
Session starts at 09:30

Multilayer characterization of Inconel-718 and Ni couples with Al in TLPB process

Prof. Dr. Silvana Sommadossi Mariana Poliserpi Prof. Dr. Roberto Boeri Prof. Dr. Cecilia Poletti

Poster F01: High-Temperature Functional Materials
Session starts at 09:30

Non-equilibrium solid solution "non-alloy" of molybdenum and sodium

Dr. Beate Bergk Dr. Uwe Muehle Dr. Ivan Povstugar Nikola Koutna Dr. David Holec Prof. Dr. Helmut Clemens Prof. Dr. Bernd Kieback

Poster S04: Micro- and Nanoarchitected Materials
Session starts at 09:30

Obtention and Characterisation of Mechanically Strong Glass-ceramics from Slag, Fly Ash, Glass Cullet and their Combinations

Dipl.-Ing. Diana Mireya Ayala Valderrama Prof. Dr. Aldo Boccaccini Dr. Jairo Alberto Gómez Cuaspud

Poster S01: Environmentally Assisted Cracking of High-Strength Alloys
Session starts at 09:30

On the effect of Al on the interaction between hydrogen and martensitic steels

Ph.D. Margot Pinson Dr. Hauke Springer Prof. Dr. Kim Verbeken

Poster P04: Nanocomposites and Nanolaminated Functional Coatings
Session starts at 09:30

Phase composition and microstructure of radiation-tolerant ZrN/SiNx and AlN/SiNx multilayer systems, irradiated by He ions

Prof. Gregory Abadias Prof. Vladimir Uglov Dr. Sergey Zlotski Dr. Arno Janse van Vuuren Dr. V. Skuratov Dr. Ihar Saladukhin

Poster S01: Environmentally Assisted Cracking of High-Strength Alloys
Session starts at 09:30

Preserving the surface integrity at nano-scale during small scale in-situ electrochmical testing

Tarlan Hajilou Prof. Afrooz Barnoush

Poster P01: Manipulation of Matter by Electric and Magnetic Fields
Session starts at 09:30

Process modification of PECVD for deposition of metal oxides: Applications for renewable energy production and high surface energy

Myeongwhun Pyeon Vanessa Rauch Dr. Yakup Gönüllü Daniel Stadler Mehmet Gürsoy Prof. Dr. Sanjay Mathur

Poster P01: Manipulation of Matter by Electric and Magnetic Fields
Session starts at 09:30

Processing of hard magnetic materials enhanced by electric currents

Ph.D. Fernando Maccari Dr. Oskar Till Dr. Iliya Radulov Bernd Stoll Dr. Konstantin Skokov Prof. Dr. Christian Elsässer Prof. Dr. Oliver Gutfleisch

Poster P04: Nanocomposites and Nanolaminated Functional Coatings
Session starts at 09:30

Self-organized Si-Al nanostructured films deposited by magnetron sputtering: a study of the growth mechanism by kinetic Monte-Carlo simulations.

Dr. Diego Martinez-Martinez Dr. Ingvild J. T. Jensen Dr. Marit Stange Torunn Kjeldstad Dr. Spyros Diplas Prof. Dr. Annett Thøgersen

Poster F06: Materials Design for Electrochemical Energy Storage
Session starts at 09:30

Shortening of industrial development time by multiscale virtual testing of lithium ion battery anodes

Dr. Oleg Benevolenski Dr. Denis Hinz

Poster F06: Materials Design for Electrochemical Energy Storage
Session starts at 09:30

Simulative investigation on the microstructure influences on the electrochemical-thermal behaviour in Li-ion cells

Adrian Schmidt Philipp Seegert Prof. Dr. Thomas Wetzel Dr. André Weber Oliver Queisser

Poster P01: Manipulation of Matter by Electric and Magnetic Fields
Session starts at 09:30

Size effects of green compacts on the shrinkage behaviors during 3YSZ flash sintering

Dipl.-Ing. Tsuyoshi Kurachi Prof. Dr. Takahisa YAMAMOTO Prof. Dr. Tomoharu TOKUNAGA Prof. Dr. Hidehiro YOSHIDA Tetsurou KOBAYASHI

Poster M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
Session starts at 09:30

Small strain elasto-plastic phase-field model based on the mechanical jump conditions

Christoph Herrmann Ephraim Schoof Dr. Daniel Schneider Felix Schwab Andreas Reiter Dr. Michael Selzer Prof. Dr. Britta Nestler

Poster F01: High-Temperature Functional Materials
Session starts at 09:30

Study of O2-Reduction Reaction and Degradation Mechanisms Operating on La0.5-XPrxBa0.5CoO3-δ Cathodes for LT-SOFCs.

Ph.D. Diana Garces Prof. Dr. Scott Barnett Dr. Hongqian Wang Dr. Gabriela Leyva Dr. Liliana Mogni

Poster S01: Environmentally Assisted Cracking of High-Strength Alloys
Session starts at 09:30

Study of hydrogen embrittlement on Fe-22Mn-0.6C TWIP steel by in situ electrochemical nanoindentation and tensile test

Ph.D. Dong Wang Prof. Dr. Afrooz Barnoush

Poster F04: Functional Materials for Energy Applications
Session starts at 09:30

Study of the ex-solution process of metallic Fe-Ni nanoparticles in Srx(Ti,Fe,Ni)O3-δ perovskites based SOFC electrodes

Dr.-Ing. Catalina Jiménez Mariano Santaya Prof. Dr. Horacio Troiani Dr. Tenglong Zhu Prof. Dr. Scott Barnett Prof. Dr. Liliana Mogni

Poster Z01: Argentinean-German Collaboration in Materials Science and Engineering
Session starts at 09:30

Tensile deformation mechanism of TRIP and TWIP Steels vs strain rate studied ex-situ by EBSD and in-situ by XRD

Dr.-Ing. Catalina Jiménez Mauro Martin

Poster C02: Going 3D: From Image to Knowledge
Session starts at 09:30

The Interaction of Twin Boundaries with Magnetic Domain Walls in MnAl-C Studied by Combined EBSD and Micromagnetic Modelling Techniques

Ph.D. Panpan Zhao Dr. Thomas George Woodcock Prof. Thomas Schrefl Dr. Markus Gusenbauer Prof. Kornelius Nielsch

Poster S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
Session starts at 09:30

The brittle-to-ductile transition in pre-deformed, textured, polycrystalline bcc metals

Dr. Jens Reiser Carsten Bonnekoh Prof. Dr. Alexander Hartmaier Dr. Daniel Weygand Dr. Andreas Hoffmann

Poster F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
Session starts at 09:30

The effect of nanoscale antiphase boundaries on the high-temperature phase transitions of γ-Al2O3

Martin Rudolph Dr. Mykhailo Motylenko Dr. Erica Brendler Anne Schmidt Dr. Steffen Dudczig Prof. Dr. Christos G. Aneziris Prof. Dr. David Rafaja

reset

Search